  |
GoFiler Legato Script Reference
Legato v 1.5d Application v 5.25a
|
| Table of Contents | < < Previous | Next >> |
Chapter Five — General Functions (continued)
5.16 Script Timing and Control
This section contains functions that help a script time operations or measure short durations of time as measured at the millisecond level. This differs from the Date and Time Functions which support date and time based on a clock and calendar.
One of the time bases for Legato is based on the Windows Tick Count which is built into the operating system as based on the computer’s hardware. The resolution of this function is limited to the resolution of the system timer, which is typically in the range of 10 milliseconds to 16 milliseconds.
The elapsed time is stored as a 32-bit value. Therefore, the time will wrap around to zero if the system is run continuously for 49.7 days. If required, a script should check for an overflow condition when comparing times.
When a script starts, the tick count is stored as a reference time count which can be reset on command. The elapsed time is the difference between the current time and the reference time.
Tick Count
GetElapsedTime — Gets the difference from the reference tick count to the current tick count in milliseconds.
GetLastActivityTick — Gets the last tick count for all user activities or a a class of activities.
GetTickCount — Gets the system tick count from the system start up.
ResetElapsedTime — Resets the elapsed time counter to the current system tick count.
Process Thread
Sleep — Sleeps for the specified number milliseconds.
Yield — Forces a yield of execution and allows any pending window messages to be processed with an option to force the frame window to update.
| Table of Contents | < < Previous | Next >> |
© 2012-2024 Novaworks, LLC. All rights reserved worldwide. Unauthorized use, duplication or transmission prohibited by law. Portions of the software are protected by US Patents 10,095,672, 10,706,221 and 11,210,456. GoFiler™ and Legato™ are trademarks of Novaworks, LLC. EDGAR® is a federally registered trademark of the U.S. Securities and Exchange Commission. Novaworks is not affiliated with or approved by the U.S. Securities and Exchange Commission. All other trademarks are property of their respective owners. Use of the features specified in this language are subject to terms, conditions and limitations of the Software License Agreement.